I decided due to the lack of community support I am not going to make a Zigbee 433mhz chip instead I will continue my efforts with the WiFi esp8266. Now that I have the 433mhz working with the esp8266 I will be performing some distance testing with a few receivers I purchased and different antennas I have.
Update to: https://blog.silocitylabs.com/post/2017/12/01/smart-things-433mhz/
I hate “exit intent” popups. The kind that automatically open when your mouse leaves the page begging “please don’t go!”. They’re annoying. They’re irrelevant (I’m often following a tutorial, not closing the tab). They interrupt the content I’m trying to read. So I made a short Userscript to globally block them.
[Read More]COD RCG is a random class generator that random generates classes for anyone who plays call of duty to enjoy. This provides new enjoyment for the game e.g. it may choose a gun the player has never used. It also brings more challenge because you never know what you’re going to get as a class, it could be good or it could put you at a huge disadvantage, but that’s where the fun comes in trying to win and do well in the game when you’re using this crazy class that you normally would not. We launched this website less than a week after call of duty came out. I created my own algorithms to randomly create a class based on the “create a class” system used in Call of Duty. It was a challenge because there are tons of possible class possibilities that can be created. So once I finished that I then had to go and make sure all the gun, attachment, camos, equipment, perks and score streaks were all named correctly. This site and app has been pretty popular with over 25,000,000 views and over 5,000,000 classes generated. The Android app has over 50k installs
[Read More]Very few people know that you can save yourself some money by buying a T-mobile router on Amazon. Downside is having to flash it to have the latest firmware free of vulnerabilities. In this guide I will show you how to flash a TM-AC1900 to a RT-AC68U then into merlin custom firmware. I have tested it myself and can confirm that it works.
Update: Asus began rolling back firmware on the stock setups. They are not providing Merlin with the source for Ai-Mesh so you need to be on stock to use it. I have updated the guide to provide instructions on how to prevent the rollback from happening. You can also use this guide to recover from a rollback.
[Read More]
I wanted to talk about my smart home setup from the ground up. I have many articles describing my setup in pieces but not everyone gets an entire overview of everything I have setup here. I don’t have a mansion or anything fancy like built in sprinkler/irrigation, so this will be more catered to your average city home.
The Assistant: r Google Home and/or Mini manage my random routines that aren’t part of a automation rule. Going to the basement to do laundry, or going to sleep at random times. I can just send a command and google home will handle it. Link your SmartThings account and Google Home together for best results. Give all your devices aliases to make it easier to command via Google. I want one located in every central room of the house, Kitchen, Living room, Master Bedroom.
Control Center:
What controls my entire setup and why I chose this hub vs others. My only hub is a Samsung SmartThings hub. This manages just about everything in my home minus the security cameras. I did heavy research on many hubs including Wink, IOT (hub-less), and Phillips hue. Why SmartThings?
[Read More]How to get a cheap smart home that actually works. Vision Micro switches lets you use the old fashion switch and also continue to use your old bulbs. Instead of paying $10-30 per smart bulb, you pay around $25 for a single or $30 for a 2 relay switch. 2 relay switches help you save a ton more money, you can use one for 2 gang boxes saving you 2x more money ($15/switch). If you think about it, most ceiling lights have 2-3 bulbs, Why buy so many bulbs when you can buy a single switch.
[Read More]
Here’s my primary project, a phone case gamepad. This has been on the backburner for a while and I’m finally going full steam on it. Major milestones will be posted here on the blog. For the week by week details follow my HackADay.io project. All project information will be open source and posted on Github.
[Read More]I have found a neat little alternative to full price switches online. I gave myself a budget of $20 per wall switch for the house and until I found something around that I was not gonna buy any. I just think that $50 for a wall switch is a little ridiculous in my opinion. These switches are still over my max budget but at least I found a reason for one of the partners here to buy it instead [bana0615]. He has a double switch in his house and they do not sell double smart switches anywhere. This micro controller solves his problem. The double switch relays will put me under budget for some locations in the house though with the ability to work for two switches at once.
[Read More]
This is a custom 3D printed wrist brace that I’m working on. I wear wrist braces to sleep for RSI / carpal tunnel but they’re not ideal. The fabric construction is hot, sweaty, and not supportive around the knuckle area of the hand. The velcro is noisy, sticks to bedding and lint, and is wearing out over time. I want something rigid, breathable, and quiet.
The design was inspired by this 3D printed cast I saw online. I scanned my arm with a Kinect using the Skanect program, then edited the model in Blender to make the brace. My plan a two-piece clamshell, probably held by o-rings or similar. I may add a hinge in the future.
[Read More]